External Corner (F Profile) 3050mm

External Corner (F Profile) for Interior PVC Cladding

The External Corner (F Profile) is a PVC trim used to create a neat, professional finish when joining two cladding panels at an external corner. It provides structural support, hides exposed edges, and enhances the durability of interior PVC wall cladding.

Key Features:

• Seamless & Professional Finish – Hides raw edges for a smooth look.
• Added Durability – Protects external corners from impact and damage.
• Easy Installation – Simply slots onto the cladding panels.
• Water-Resistant – Helps prevent moisture ingress in wet areas.
• Low Maintenance – Wipe clean with a damp cloth; no grouting required.
• Available in Various Sizes & Colors – Matches different cladding styles.

Where is the External Corner (F Profile) Used?

• Bathrooms & Wet Rooms – Seals and protects external wall corners from water damage.
• Kitchens & Utility Rooms – Prevents dirt buildup at corner joints.
• Commercial Interiors – Used in restaurants, salons, and hospitals for a clean, hygienic finish.
• Garages & Workspaces – Adds strength to corner joins in high-traffic areas.

How to Install an External Corner (F Profile) on PVC Cladding

1. Measure & Cut the F Profile
   Measure the height of the external corner where the trim will be placed.
   Use a fine-toothed saw or utility knife to cut the F Profile to the correct length.
2.  Prepare the PVC Cladding Panels
   Ensure the panels are clean, dry, and cut to size before installation.
   Leave a small expansion gap if required (follow manufacturer guidelines).
3. Fix the External Corner (F Profile)
   Slot the cladding panels into the profile from both sides.
   Use strong adhesive along the back of the profile for a secure hold.
   For additional strength, mechanical fixing (screws) can be used, but this is usually not necessary for interior applications.
4. Seal & Finish
   If installing in a wet area (bathrooms, kitchens), apply a thin bead of silicone sealant along the edges for extra waterproofing.
   Wipe away excess sealant for a clean finish.

Maintenance & Cleaning

Simply wipe down with warm soapy water and a soft cloth.
Avoid abrasive cleaners or harsh chemicals to preserve the finish.